ACTi 4-Megapixel Dome Camera 6fps 2032x1920 Progressive Scan CMOS Model KCM-3911 - RetailSKU: AC21-KCM-3911 |
|
Specification | |
Brand | ACTi |
Model | KCM-3911 |
Device | |
Device Type | Hemispheric Camera |
Image Sensor | Progressive Scan CMOS |
Sensor Size | Sensor Size 1/2.5 “ (5.7 x 4.28 mm) |
Day / Night | Yes |
Minimum Illumination | Color: 1.63 lux at F2.8 (30 IRE, 2400°K); B/W: 0.06 lux at F2.8 (30 IRE, 2400°K) |
Color to B/W switch | ISP based switch, configurable |
Mechanical IR Cut Filter | Yes |
IR Sensitivity Range | 700 - 1100 nm |
IR LED | No |
Electronic Shutter | 1 /15 - 1/2000 sec (auto mode) |
Lens | |
Focal Length / Aperture | Fisheye Lens, 1.05 mm / F2.8 |
Iris | Fixed iris |
Focus | Fixed Focus |
Horizontal Viewing Angle | 180° |
Video | |
Compression | H.264, MPEG-4 SP, MJPEG |
Maximum Frame Rate vs. Resolution | 6 fps at 2032 X 1920; 12 fps at 1920 X 1080; 12 fps at 1280 X 720; 12 fps at 640 X 480 |
Mode | 180° / 360° Panorama, ePTZ, 6 VGA, Motion Detection Preset |
Multi-Streaming | Simultaneous dual steams based on two configurations in single view mode; Multiple streams based on single configuration in 6 cropped VGA mode |
Bit Rate | 28 Kbps - 6 Mbps (per stream) |
Bit Rate Mode | Constant, Variable |
Image Enhancement | ExDR (Extreme Dynamic Range), White balance: automatic, hold and manual; Brightness; Saturation; Contrast; Edge enhancement; Automatic gain control; 2D+3D Digital noise reduction; Flickerless; Defogging |
Privacy Mask | 4 configurable regions |
Text Overlay | User defined text on video |
Audio | |
Compression | 8 kHz, Mono, PCM, 16 bit encoding |
Audio-In | Cable with 3.5mm Phone Jack |
Audio-Out | Cable with 3.5mm Phone Jack |
Network | |
Protocol & Service | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour |
Ethernet Port | 1, Ethernet (10/100 Base-T), RJ-45 connector |
Security | IP address filtering; HTTPS encryption; Password protected user levels; IEEE 802.1X network access control |
Alarm | |
Alarm Trigger | Video motion detection (3-6 regions, depending on video mode); External device through digital input |
Alarm Response | Notify control center; Go to ePTZ preset point or preset tour; Change camera settings; Command other devices E-mail notification with snapshots; Save video or snapshot to local storage; Upload video, snapshot to FTP server; Activate external device through digital output |
Interface | |
Digital Input | 2, terminal block |
Digital Output | 2, terminal block |
Local Storage | MicroSD/MicroSDHC memory card slot (card not included) |
General | |
Power Source / Consumption | PoE Class 3 (IEEE 802.3af) / 9.6W DC 12V / 7.68W ( adapter not included) |
Weight | 425 g (0.93 lb) |
Dimensions (Ø x H) | 150mm x 45.32mm (5.9" x 1.8") |
Mount Type | Flush, Wall, Pendant, Pole, Corner |
Operating Temperature | -10 °C - 50°C (14°F - 122°F) |
Operating Humidity | 10% ~ 85% RH |
Approvals | CE, FCC |
Warranty | 1 Year Manufacturer Warranty |