HP ProCurve 2910al-48G Ethernet Switch Model J9147A#ABA - RetailSKU: HP15J9147AABA |
|
| Specification | |
| Brand | HP |
| Model | J9147A#ABA |
| Form Factor | 1U height, Rack-mountable |
| Total Number of Network Ports | 48 |
| Number of Network (RJ-45) Ports | 48 |
| Network Technology | 10/100/1000Base-T |
| Number of Total Expansion Slots | 4 |
| Number of SFP Slots | 4 |
| Expansion Slot Type | SFP |
| Shared SFP Slot | Yes |
| Layer Supported | 2 |
| Manageable | Yes |
| Management | HP ProCurve Manager Plus IEEE 802.1p QoS IEEE 802.1q VLAN HTTP CLI Telnet DHCP SNMP v1, v2c, v3 RMON 1, 2, 3, 9 |
| Standard Memory | 512 MB |
| Memory Technology | SDRAM |
| Flash Memory | 4 MB |
| Processor | Dual ARM1156T2S 515 MHz |
| Additional Information | Miercom Certified Green Award 1GB Flash ROM IEEE 802.1X Port Based Network Access Control TACACS RADIUS Secure Sockets Layer (SSL) SSH v6 ACL |
| Address table size | 16000 entries |
| Input Frequency | 50/60 Hz |
| Input Operating Current | 2.1/1.1 A |
| Input Voltage | 100-127/200-240 VAC |
| Management features | HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS-232C) |
| Ports | 44 autosensing 10/100/1000 ports(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T), Media Type: Auto-MDIX, Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; 4 dual-personality ports, each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers); 1 RJ-45 serial console port; Supports a maximum of 4 10-GbE ports, with optional module |
| Power consumption | 105 W (maximum) |
| Power consumption, standby | 64 W |
| Power features | The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz |
| Dimensions (WxDxH) | 17.4 x 14.4 x 1.73 in. |
| Weight | 11.2 lb. |
| Warranty | HP Direct Manufacturer Warranty |
